True Temper Wheelbarrow Tire

If you’re in the market for a new wheelbarrow tire, you may be wondering if True Temper is the right brand for you. As one of the leading manufacturers of wheelbarrows and lawn & garden equipment, True Temper wheelbarrow tires are known for their durability and quality construction. This buying guide will provide you with everything you need to know about True Temper wheelbarrow tires to help you decide if they are the best option for your wheelbarrow.

Where to Buy True Temper Wheelbarrow Tires

True Temper wheelbarrow tires can be purchased from a variety of retailers, both online and in physical stores. When shopping online, Amazon and Home Depot are great places to find True Temper tires. They typically carry the most common sizes and tread patterns. You can also purchase directly from the True Temper website.

If you prefer to see tires in person before buying, visit your local hardware store, home improvement center, lawn & garden supply store. Major national retailers like Lowe’s, Ace Hardware, and Tractor Supply will often stock True Temper wheelbarrow tires on the shelf or can special order them for you. Local garden centers and nurseries are another good option for finding True Temper tires.

No matter where you shop, be sure to take your wheelbarrow with you when buying a new tire. This allows you to match up the size and ensure proper fit. Also, check availability of the tread pattern you need. The most common are smooth and lug tread, but specialty stores may carry additional options.

How to Replace a True Temper Wheelbarrow Tire

When it’s time to replace your True Temper wheelbarrow tire, the process is relatively straightforward. Here are the basic steps:

1. Remove the old wheelbarrow tire – Deflate the tire completely, then using tire levers, work the tire off the wheel rim. You may need to apply lubricant to help break the tire bead.
2. Inspect the wheel rim – Before installing the new tire, examine the rim for any cracks or damage, and make sure it is clean.
3. Mount the new True Temper tire – Start on one side and work the tire bead over the edge of the rim using your hands or tire levers. Work gradually around the wheel until the first bead pops into place.
4. Inflate slightly – Add just enough air to round out the tire and make it easier to install the second bead. Don’t inflate fully yet.
5. Finish mounting – Use your hands or levers to hook the second bead over the rim edge on the opposite side. Once in place, check that the tire looks straight and centered.
6. Fully inflate – Use an air compressor or portable pump to inflate the tire to the PSI specified on the sidewall. This will securely seat the beads.
7. Reinstall – Place the newly fitted tire/wheel back onto the wheelbarrow frame and secure with retaining hardware. Check that the tire spins freely.

With the right techniques and tools, replacing a True Temper wheelbarrow tire is usually a quick, simple process. Taking your time to do it properly will ensure safe function and extend the tire life.

What Size are True Temper Wheelbarrow Tires?

True Temper offers wheelbarrow tires in four common industry sizes – 8″, 10″, 12″, and 16″. The size needed depends on the wheelbarrow model you have:

• 8″ tires fit smaller wheelbarrows designed for residential use, often with a tray capacity of 3-4 cubic ft.
• 10″ tires are suitable for most medium-duty wheelbarrows up to 6 cubic ft. capacity. This is a very popular OEM size.
• 12″ tires work for larger contractor or farm wheelbarrows, typically with a tray over 6 cubic ft.
• 16″ pneumatic tires are made for True Temper’s pneumatic-tired wheelbarrow models designed for rugged applications.

To determine the replacement True Temper wheelbarrow tire size you need, first look for any markings stamped on the tire sidewall or reference the owner’s manual. You can also simply measure across the tread width.

Most local home improvement stores will stock the most common sizes, but specialty tire retailers offer the best selection. They can also special order if needed.

Are True Temper Wheelbarrow Tires Inflatable?

The majority of True Temper wheelbarrow tires are solid rubber, non-inflatable tires. This type is preferred by most homeowners and professional tradesmen for their durability and hassle-free maintenance.

However, True Temper does offer a specialty line of pneumatic (inflatable) wheelbarrow tires on certain models designed for professional use. The pneumatic tires feature sturdy rubber construction with thick treads, a heavy duty tube, and are engineered to handle heavy loads.

The pneumatic models like the True Temper “Bigfoot” allow the air pressure to be adjusted to suit the load and terrain. Running at lower PSI provides cushioning when moving heavy materials across rough or uneven ground. The knobby tread pattern gives great traction.

So in summary – basic True Temper wheelbarrow tires are solid rubber, but they do make inflatable options for specialty wheelbarrows when added cushioning and traction are needed. Tire pressure can be tuned to match the load.

How Much Does a True Temper Wheelbarrow Tire Cost?

On average, a replacement True Temper wheelbarrow tire will cost between $15 and $50 depending on the size and tread type. Some factors affecting the price:

• Tire size – Smaller 8″ tires are least expensive, while large 16″ pneumatic models cost the most.
• Tread pattern – Lug tread tires typically cost more than smooth tread.
• Materials – Premium rubber compounds and durable casings increase cost.
• Retailer – Big box stores tend to have lower prices than specialty shops.
• Features – Run-flat inserts, foam-filled cores, and other options add cost.

For the most common 10″ smooth tire, expect to pay around $25-35 at home improvement stores. Larger contractor-grade tires can run $40-50. The 16″ pneumatic Bigfoot tires sell for $75-100.

When replacing a True Temper wheelbarrow tire, it pays to shop around between retailers and buy the features you need. But don’t sacrifice quality to save a few dollars. A quality tire lasts longer and performs better.

The Durability of True Temper Wheelbarrow Tires

True Temper wheelbarrow tires live up to the company’s reputation for strength and durability. Several factors contribute to their long service life:

• Premium rubber compounds – The tread rubber is specially formulated to resist wear, cracking, and weathering.
• Multi-ply rating – More plies (layers) make the tire tougher and more puncture resistant.
• Thick tread depth – Deep, chunky lugs provide plenty of grip and withstand abrasion.
• Sturdy sidewalls – Resist damage from curbs and debris.
• Heavy bead wire – Creates a tight seal against the rim and anchors the tire firmly.
• Quality control – Consistent production standards ensure optimal performance.

With proper maintenance and avoiding hazards, a True Temper wheelbarrow tire can last 5 years or more. Compare that to cheaper tires that may only last one season. Spending a few extra dollars upfront pays off in the long run with True Temper. Your wheelbarrow will roll smoothly for years on their rugged, dependable tires.

Materials Used in True Temper Wheelbarrow Tires

True Temper utilizes premium materials and construction methods to produce rugged, enduring wheelbarrow tires:

• Rubber compound – Proprietary tread rubber blend provides strength, grip, and weather resistance. Made to handle sun, ozone, oils.
• Fabric casing – Layers of durable polyester or nylon fabric give the tire body its shape, flexibility, and cut/tear resistance.
• Bead wire – High tensile steel wire wrapped into each tire bead creates an air-tight seal against the wheel rim.
• Sidewall rubber – Flexible sidewall rubber compounds resist cracking from natural oils, chemical exposure, and weathering.
• Tread pattern – Deep, chunky lugs (on lug tread tires) are molded from abrasion resistant rubber. Withstands rugged use.
• Foam filling – Some tires feature molded foam filling to eliminate flats and increase load capacity.

True Temper engineers select the best construction materials and designs to build rugged, substantial tires for wheelbarrows. This gives their tires the strength to endure tough working conditions while providing long service life.

Using a Non-True Temper Tire on a True Temper Wheelbarrow

It is technically possible to install a tire from another brand onto a True Temper wheelbarrow, but doing so has some drawbacks:

• The sizing may not match up exactly, resulting in loose fit or rubbing.
• Load capacity may be reduced if the replacement tire has fewer plys or thinner casing.
• Performance will suffer if the tread compound is not as durable or traction is compromised.
• The tire may not seat properly on True Temper’s specially designed rim profile.
• Fitting issues could arise at the critical tire bead and rim interface.
• Vibration may occur at certain speeds if tire is unbalanced.

While other brands of tires can be made to physically fit a True Temper wheelbarrow, the result is often decreased load capacity, traction, and field life. Performance won’t match that of True Temper’s precision-engineered components. For best results, stick with True Temper’s high quality tires.

Maintaining True Temper Wheelbarrow Tires

To get the longest life from True Temper wheelbarrow tires and maintain safe function follow these maintenance tips:

• Check pressure regularly if you have pneumatic tires, and refill to recommended PSI.
• Inspect for cuts or cracks in the tread and sidewalls and replace damaged tires.
• Ensure even wear by rotating tires if one side is worn. Align axle/wheel if needed.
• Clean out debris stuck in the tread to prevent buildup. Avoid sharp objects that could puncture.
• Store out of sunlight when possible to minimize UV and ozone damage.
• Avoid chemicals/oils that degrade rubber. Wash off any spills when wet.
• Lubricate axles to reduce friction and permit easy rolling.
• Use smooth technique when rolling heavy loads to minimize skidding.
• Inflate to maximum rating when handling larger loads for extra support.

With proper care and maintenance, True Temper tires will deliver optimal performance and long life on your wheelbarrow.

How to Fix a Flat True Temper Wheelbarrow Tire

True Temper’s solid rubber tires won’t go flat in the traditional sense, but they can develop leaks if a hole or split occurs. Here’s how to fix a leaking True Temper wheelbarrow tire:

Step 1) Locate the leak – Spin the tire and listen/look closely for any escaping air. Mark the leak spot.

Step 2) Remove the tire – Deflate completely, then unseat the beads from the rim using tire tools. Pull tire off the wheel.

Step 3) Prepare the injury – Use sandpaper or a rasp to rough up the inner surface around the leak. This helps the patch adhere.

Step 4) Apply rubber cement – Smear a thin layer of vulcanizing cement 1-2 inches around the leak site. Allow to dry 5 minutes.

Step 5) Apply patch – Place the adhesive rubber patch over the injury and press firmly for 2-3 minutes to seal the bond.

Step 6) Reinstall tire – Put the tire back on the wheel, ensuring the beads seat fully against the rim. Re-inflate to recommended PSI.

The patch should create an air-tight seal. Check for any escaping air once inflated. With a proper vulcanized repair, the tire can be returned to service good as new.

True Temper Wheelbarrow Tire Warranty Information

One advantage of choosing True Temper wheelbarrow tires is the manufacturer’s warranty protecting against defects:

• Workmanship & Materials – Covers any tire defects in how the tire was made.
• Performance – Protects against unexpected tire failures under normal usage.
• Standard warranty term is 90 days from date of purchase.
• Save your receipt as proof of purchase.
• Registering your wheelbarrow extends warranty up to 1 year.
• Warranty is voided by misuse, improper maintenance, or accidents.
• Covers full or prorated replacement cost of defective tire.
• Labor charges for removal/installation are not included.

Always buy from authorized True Temper dealers to ensure you receive the full factory tire warranty. Make sure to register your wheelbarrow online.

Do True Temper Wheelbarrow Tires Come with Rims?

True Temper only sells their wheelbarrow tires separately without the rim, also called the wheel.

The tire and rim are two separate components on a wheelbarrow. When you purchase a complete new True Temper wheelbarrow, it will come fully assembled with both tires and rims.

But when buying replacement tires, you are only getting the rubber tire itself, not the metal wheel rim. The existing rim on your wheelbarrow can be reused by swapping on the new True Temper tire.

If your current wheel rim is badly bent, rusted, or cracked, you would need to purchase a complete new wheel assembly with a rim and pre-installed tire. Overall it’s more cost effective to just replace individual tires as needed while reusing sturdy rims.

Tread Patterns for True Temper Wheelbarrow Tires

True Temper offers wheelbarrow tires in three common tread patterns to suit different needs:

Smooth Tread

• Provides a smooth, quiet ride
• Low rolling resistance
• Ideal for concrete, asphalt, and hard surfaces
• Less expensive

Multi-Rib Tread

• Self-cleaning tread prevents jamming
• Slightly better traction than smooth
• Works well on both hard ground and loose dirt/gravel

Heavy Lug Tread

• Deep, chunky lugs bite into soft ground
• Maximizes traction in mud, gravel, and rough terrain
• Best for off-road use pulling heavy loads
• More expensive than other treads

Consider the ground conditions where you’ll use the wheelbarrow most when choosing lug type. Also factor in noise, rolling effort, and cost.

Measuring Your Wheelbarrow for Replacement Tires

To find your True Temper wheelbarrow’s tire size, you need to take two measurements:

Tire diameter – This is the overall diameter from the ground to the top of the tire tread.

• Lay a tape measure across the full width and note the measurement.

Tread width – This is the width of just the tread portion, not including sidewalls.

• Measure across the tread where it contacts the ground.

Compare your measurements against True Temper’s sizing charts to determine the closest match. Standard sizes are 8″, 10″, 12″ and 16″ diameter. Tread width varies by model.

Knowing the exact original size ensures proper replacement fit. Bring your measurements when shopping for new True Temper tires to match them up.

Purchasing True Temper Tires Online

Thanks to the internet, purchasing True Temper wheelbarrow tires online is now an easy and convenient option. Here are some tips for buying tires online:

• Browse seller websites for the exact model needed for your wheelbarrow.
• Look for tires shipped directly from True Temper if possible.
• Check seller ratings and reviews from other buyers.
• Consider etailers with free shipping or returns to save on costs.
• Buy from stores with live customer chat so you can ask questions.
• Review return policies in case you need to exchange for a different size.
• Make sure your selected seller has inventory available to ship immediately.

As long as you carefully match specs and dimensions, purchasing True Temper tires online can save time and money versus buying locally. Just make sure you use a reputable online retailer.

Step-By-Step Guide to Installing a True Temper Tire

Follow these steps to safely and easily install a new True Temper tire onto your wheelbarrow:

1. Remove old tire – Deflate completely and use tire levers to unseat both beads from the rim.
2. Inspect rim – Check for dents or rust and make sure rim is clean before installing new tire.
3. Apply lubricant – Use a small amount of liquid soap or rubber lubricant around rim edge and beads to help seating.
4. Mount one bead – Hook one tire bead over the rim edge and work around the wheel by hand.
5. Partially inflate – Add enough air to round out the tire but don’t fully inflate yet.
6. Mount second bead – Install the other bead onto the rim the same way. Ensure tire is centered.
7. Fully inflate – Use an air compressor or portable pump to inflate tire to its recommended PSI.
8. Check seating – Inspect that both beads have fully popped into place and sealed against the rim.
9. Reinstall wheel – Put the freshly fitted wheel/tire assembly back on your wheelbarrow frame.
10. Verify function – Spin wheel to ensure it turns smoothly without wobbling or rubbing.

Getting Solid Rubber True Temper Tires

All standard True Temper wheelbarrow tires feature a sturdy solid rubber construction. Unlike pneumatic tires with inner tubes, solid rubber tires:

• Never go flat – No need to worry about punctures, leaks or maintaining air pressure.
• Absorb shock through the rubber – Provides cushion without inflation.
• Roll smoothly – Solid uniformity prevents bounce or vibration at high speeds.
• Resist damage – No inner tube to puncture or leak if cut or snagged.
• Require no maintenance – Just mount the tire and go – no air fill needed.
• Support heavy loads – Solid rubber has excellent weight capacity and strength.

For most homeowners and contractors, the solid rubber design is preferable for its puncture-proof reliability and hassle-free performance.

True Temper does make specialty pneumatic tires for some models when air adjustability is preferred. But the standard tires are solid rubber.

Choosing the Right True Temper Wheelbarrow Tire

Selecting the ideal True Temper wheelbarrow tire depends on:

Wheelbarrow Type

• Homeowner or contractor grade
• Tray size/capacity
• Single or dual wheel

Tire Size

• Proper diameter and width
• Correct load rating

Tread Pattern

• Depth and lug shape
• Traction level needed

Features

• Solid or pneumatic
• Foam filled, multi-ply, etc.

Ground Conditions

• Paved or unpaved surfaces
• Soft or rugged terrain

Consider how you use your wheelbarrow and the environment to narrow options. Bring your wheelbarrow to test fit. Buy the most durable tire that matches your performance needs and budget.

Compatibility of True Temper Tires with Other Brands

Owners sometimes wonder if True Temper wheelbarrow tires will fit wheelbarrows made by other brands. The compatibility depends on:

Rim Size

• True Temper tires will only fit rims of the correct diameter. Measure rim width to ensure proper tire sizing.

Rim Contour

• The bead seat profile must match. True Temper rims have a specialized shape that tires mold tightly against.

Hub Offset

• The relationship of the rim to the frame/axle must align properly, or the tire can rub.

Performance

• Even if made to physically fit, tire capacity, traction and handling may be compromised on non-True Temper wheelbarrows.

In some cases, a True Temper tire will successfully mount to another brand’s rim and function properly. But results are inconsistent. For best safety and performance, use True Temper components together as engineered. Don’t compromise quality by mismatching.

Where to Find Wheelbarrow Tire Reviews

If researching True Temper wheelbarrow tires, check these sources for customer reviews:

• Amazon – Hundreds of buyers review the tire you’re considering. Focus on recent ratings.
• Home Depot – Reviews primarily from homeowners who purchased in-store.
• TrueTemper.com – Check company website for testimonials.
• Specialty forums – Landscapers, contractors, farmers, etc give detailed reviews based on real-world use.
• YouTube – Watch tire mounting, repair, and performance test videos.
• Reddit – Users often post reviews asking or answering wheelbarrow tire questions.
• Seller websites – Read ratings on retail sites like Walmart, Lowes, Northern Tool, etc.

Look for in-depth reviews from those with similar needs to get the best sense of how True Temper’s tires will perform for you. Durability claims should be backed up with long term testing. Customer photos also help evaluate tread wear and longevity. Review a range of sources for the full picture before purchasing.